Remove/Install Rear Soundproofing For Engine - AR94.30-P-5410MRD

Engine 274.9 in model 213

except code 920 (Direct petrol injection with stratified charging)

Engine 274.9 in model 238

except code 920 (Direct petrol injection with stratified charging)

Fig 1: Rear Engine Soundproofing Component Location - Model 213 With Engine 274.9 Except Code 920

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unfasten rear engine mount from rear engine crossmember, lift transmission and support	Engine 274.9 in model 238 except code 920 (Direct petrol injection with stratified charging)	AR22.10-P-1160MRD
1		Engine 274.9 in model 213 except code 920 (Direct petrol injection with stratified charging) Use a hardwood block 50x50 mm to support rear engine mount.	AR22.10-P-1160OLC
2	Remove upper engine cover
3	Remove screw/bolt (2)	M6 x 1	*BA00.10-P-1002-04A
4	Unclip soundproofing (1) from bracket (3) and remove
5	Install in the reverse order

METRIC SCREWS/BOLTS AND NUTS AS PER MBN 10 105, 10 143

Number	Designation		8.8	10.9
BA00.10-P-1002-04A	M6 x 1	Nm	9	13