Remove/Install Front Power Window Switches - AR72.29-P-0100LWE

Model 213 

Fig 1: Front Power Window Switches Components Location - Model 213

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Move long wedge (3) into gap (arrow A) and lift cover (1) toward Front out of armrest (2)	Long wedge	Fig 2
2	Disconnect electrical connector from driver side power window and outside mirror adjustment switch group (S20) or passenger side power window switch (S21/2)
3	Unclip driver side power window and outside mirror adjustment switch group (S20) or passenger side power window switch (S21/2) from cover (1)	: Ensure that driver side power window and outside mirror adjustment switch group (S20) or passenger side power window switch (S21/2) is seated correctly in cover (1).
4	Install in the reverse order

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA