Retrofit CD Drive - AZ82.64-P-0002LWI

Model 213.088/089/288/289 

with code 320 (Single CD drive preinstallation) 

with code 460 (Canada version) 

Model 213.088/089/288/289 

with code 320 (Single CD drive preinstallation) 

with code 494 (US version) 

Courtesy of MERCEDES-BENZ USA

	Remove
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove glove box
		The electrical wiring harness for the CD drive (1) is fixed in place before the glove compartment housing on the instrument panel cross member.	AR68.10-P-1402LWE
	Install
2	Fabricate adhesive film cutting template for CD drive (1)		AZ82.64-P-0002-05LF
3	Use cutting template to cut adhesive film to size
4	Produce cutting template for CD drive (1)		AZ82.64-P-0002-10LWP
5	Prepare glove box for installation of CD drive (1)		AZ82.64-P-0002-08LWP
6	Make cutout in glove compartment housing		AZ82.64-P-0002-11LWP
7	Release electrical wiring harness for CD drive (1) from instrument panel cross member
8	Place glove box in front passenger footwell
9	Retrofit CD drive (1) in glove box		AZ82.64-P-0002-03LWR
10	Attach absorber fleece sheets to the glove box
11	Install glove box with CD drive (1)
			AR68.10-P-1402LWE
		Pay attention to installation of lines.
12	Install remaining parts
	Update Vehicle Documentation (VeDoc)
13	Attach "CD drive retrofitted as per AN82.64-P-0002LWG note" under field organization texts	On design group 82 and design group 54.
	Check
14	Perform function test	See Owner's Manual.