Fabricate Drilling Template For CD Drive - AZ82.64-P-0002-07LWP

Model 213.088/089/288/289 

with code 460 (Canada version) 

Model 213.088/089/288/289 

with code 494 (US version) 

Model 238.3 

with code 460 (Canada version) 

Model 238.3 

with code 494 (US version) 

Model 238.4## 1# 

Model 257 

with code 460 (Canada version) 

Model 257 

with code 494 (US version) 

Model 290 

with code 460 (Canada version) 

Model 290 

with code 494 (US version) 

Drilling template(S) 

Courtesy of MERCEDES-BENZ USA

1. Print out the drilling template drawing(S).
2. Determine dimensions (A, B) of print-out.
3. Determine scaling factor.

   Divide dimension specified (A) by dimension determined (A).

   Divide dimension specified (B) by dimension determined (B).

4. Copy printed-out drilling template(S) to original size using determined scaling factor.
5. Cut out drilling template(S).