Wiring Diagram Of Exterior Lights - PE82.10-P-2000-97XCB
Model 257 as of model year 2021 with code 631 (Static LED headlamps, left-hand traffic)
except code 640 (High-performance LED)
except code 641 (Dynamic LED headlamps, left-hand traffic)
except code 642 (Dynamic LED headlamps, right-hand traffic)
Headlamps E2
Model 257 as of model year 2021 with code 632 (Headlamps, LED, static, right-side traffic)
except code 640 (High-performance LED)
except code 641 (Dynamic LED headlamps, left-hand traffic)
except code 642 (Dynamic LED headlamps, right-hand traffic)
Headlamps E2
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 40L |
| CAN PER | Peripherals CAN | 13K |
| E2 | Right front lamp unit | 4A |
| E2 | Right front lamp unit | 29A |
| E2 | Right front lamp unit | 23A |
| E2 | Right front lamp unit | 12A |
| E2 | Right front lamp unit | 19A |
| K40/8 | Engine fuse and relay module | 9L |
| K40/8f110 | Fuse 110 | 8L |
| N10/6 | Front SAM control unit | 18L |
| W2 | Right front ground point at lamp unit | 10H |
| X25/7 | Driver side engine compartment/frame floor assembly electrical connector | 13F |
| X30/27 | Periphery CAN (CAN PER) potential distributor | 13L |