Detach/Attach Belt End Fitting - AR91.40-P-1030-02FR

Model 167, 257, 290 

except code 460 (Canada version) 

except code 494 (US version) 

Remove 

1. Pull seat belt end fitting (1) upwards in direction of arrow (A).

   Courtesy of MERCEDES-BENZ USA

2. Release seat belt end fitting (1) through minimum (approx. 2 mm) lifting of spring (2) in direction of arrow (B1), then push downwards in direction of arrow (B2) and remove.

   Courtesy of MERCEDES-BENZ USA

   Installing 

3. Position seat belt end fitting (1) in direction of arrow (D) on bolt (3) then pull upwards in direction of arrow (A).

   Courtesy of MERCEDES-BENZ USA

4. Push seat belt end fitting (1) downwards in direction of arrow (B2).

   The spring (2) must make contact at bolt head of screw/bolt (3). Dimension (E) must be at least 1.7 mm.

5. Have engagement checked by a second person.

Courtesy of MERCEDES-BENZ USA