Injection Nozzles, Injection Valves, Lines - BA07.03-P-1000-01MRT
Engine 256.9
MODIFICATION NOTES
| 11.12.2019 | Value changed: Union nut, high-pressure line to fuel distributor/fuel high-pressure pump |
HIGH-PRESSURE LINE, LOW-PRESSURE LINE, FUEL DISTRIBUTOR
| Number | Designation | Engine 256.9 | |||
|---|---|---|---|---|---|
| BA07.03-P-1001-01MRT | Union nut, high-pressure line to fuel distributor/fuel high-pressure pump | In case of reusability | Nm | 18 | |
| For new lines | Stage 1 | Nm | 15 | ||
| Stage 2 | ∠° | 90 | |||
| BA07.03-P-1004-01MRT | Bolt, holder for high-pressure line to camshaft housing/cylinder head | Nm | 8 | ||
| BA07.03-P-1006-01MRT | Union nut, low-pressure line to fuel high-pressure pump | Stage 1 | Nm | 15 | |
| Stage 2 | ∠° | 75 | |||
| Stage 3 | ∠° | 25 | |||
| BA07.03-P-1007-01MRT | Bolt, holder for low-pressure line to shield/supporting plate | Nm | 8 | ||
| BA07.03-P-1008-01MRT | Bolt, holder for low-pressure line to lifting eye/crankcase/timing case cover | Nm | 8 | ||
| BA07.03-P-1009-01MRT | Cap on service connection | Plastic | Nm | 1 | |
| BA07.03-P-1010-01MRT | Union nut, fuel hose to diagnostic socket | Nm | 24 | ||