LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> CLS450 Base >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft - 257 Chassis >> Testing & Repair >> Press Rubber Mount With Grooved Ball Bearing Onto Linkage Arm - AR41.10-P-0100-05MSA

Press Rubber Mount With Grooved Ball Bearing Onto Linkage Arm - AR41.10-P-0100-05MSA

Model 257, 290 

G13842180Courtesy of MERCEDES-BENZ USA
  1. Press elastomer bearing with grooved ball bearing (7) onto joint fork of rear half of propeller shaft using SPECIAL TOOL drift (05).

    IMPORTANT The open side of the grooved ball bearing (7) must face downwards.

    G13842173Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals