Press Grooved Ball Bearing In/Out Of Elastomer Bearing Of Propeller Shaft - AR41.10-P-0100-03MSA

Model 257, 290 

Courtesy of MERCEDES-BENZ USA

1. Press grooved ball bearing (8) using press out/in tool (04a, 04b) out of elastomer bearing (7b).

   Press out 

   Courtesy of MERCEDES-BENZ USA

2. Press grooved ball bearing (8) using press out/in tool (04a, 04b) into elastomer bearing (7b) up to contact surface (arrows).

   Check for correct seating of grooved ball bearing (8).

   Press in 

   Courtesy of MERCEDES-BENZ USA