Remove/Install Spare Tire Well Panel - AR68.30-P-4620FR
Model 257
Shown on model 257 with code 287 (Folding seat backrests in rear) and with code B01 (48V technology) and with code 30P (Stowage Space Package)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove rear center assembly paneling | AR68.30-P-4786FR | |
| 2 | Fold up trunk floor and fix in place | ||
| 3 | Remove support (1) with stowage box (2) | Model 257 with code 30P (Stowage Space package) |
|
| 4 | Remove retaining clips from side trims in trunk (4) | ||
| 5 | Guide spare wheel well trim (3) out from under side trims in trunk (4) and trunk floor front section (5) and remove | ||
| 6 | Install in the reverse order |