Wiring Diagram Of Exterior Lights - PE82.10-P-2000-97XCC
Model 257, 290 as of model year 2021 with code 640 (High-performance LED) Headlamps E1
Model 257, 290 as of model year 2021 with code 641 (Dynamic LED headlamps, left-hand traffic) Headlamps E1
Model 257, 290 as of model year 2021 with code 642 (Dynamic LED headlamps, right-hand traffic) Headlamps E1
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 56L |
| B22/7 | Left rear level sensor | 29L |
| B22/8 | Left front level sensor | 32L |
| CAN PER | Peripherals CAN | 23K |
| Code 459 | Steel suspension with adjustable damping | 26D |
| Code 489 | AIR BODY CONTROL | 26D |
| E1 | Left front lamp unit | 3A |
| E1 | Left front lamp unit | 38A |
| E1 | Left front lamp unit | 43A |
| E1 | Left front lamp unit | 12A |
| E1 | Left front lamp unit | 20A |
| E1 | Left front lamp unit | 29A |
| E2 | Right front lamp unit | 15L |
| K40/8 | Engine fuse and relay module | 8L |
| K40/8f110 | Fuse 110 | 9L |
| K40/8f133 | Fuse 133 | 7L |
| N10/6 | Front SAM control unit | 19L |
| W9 | Left front ground point (at lamp unit) | 10E |
| X25/7 | Driver side engine compartment/frame floor assembly electrical connector | 23G |
| X30/27 | Periphery CAN (CAN PER) potential distributor | 23L |
| Z194/10z1 | Terminal 30t connector sleeve | 8G |
| Z194/11z1 | Terminal 30t connector sleeve | 7G |
| Z194/8z1 | Circuit 30L connector sleeve | 20G |
| Z194/9z1 | Circuit 30L connector sleeve | 18G |