Front Area With Front Reinforcement Torque Specifications - BA62.30-P-1000-02O
Model 118, 177, 243, 247
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 118 | Model 177 | |||
|---|---|---|---|---|---|---|
| BA62.30-P-1001-02O | Screw, impact absorber/absorber to crossmember | M10 | Stage 1 | Nm | 28 | 28 |
| 2nd stage | ∠° | 135 | 135 | |||
| BA62.30-P-1002-02O | Bolt, impact absorber/mounting support to longitudinal member | M12 | Nm | 125 | 128 | |
| BA62.30-P-1003-02O | Bolt, connecting carrier to front axle carrier/radiator support | M8 | Nm | 16 | 16 | |
| BA62.30-P-1004-02O | Bolt, radiator support to mounting support | M8 | Nm | 16 | 16 | |
| BA62.30-P-1005-02O | Bolt, holder for front cross strut to crossmember | M8 | Nm | - | 32 | |
| BA62.30-P-1006-02O | Bolt, front cross strut to holder | M8 | Nm | - | 32 | |
| BA62.30-P-1007-02O | Bolt, assembly carrier at top to body | M8 | Nm | 20 | 20 | |
| BA62.30-P-1008-02O | Bolt, assembly carrier at bottom to mounting support | M6 | Nm | 8 | 4 | |
| BA62.30-P-1009-02O | Bolt, holder for air filter housing to longitudinal member | Nm | 20 | 20 | ||
| BA62.30-P-1010-02O | Screw, holder to connecting carrier | M6 | Nm | 6 | 6 | |
| BA62.30-P-1011-02O | Screw, front bumper support to cross strut | Nm | 17 | 17 | ||
| BA62.30-P-1012-02O | Screw, center strut to suspension strut tower holder | M10 | Nm | 30 | 30 | |
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 243 | Model 247 | |||
|---|---|---|---|---|---|---|
| BA62.30-P-1001-02O | Screw, impact absorber/absorber to crossmember | M10 | Stage 1 | Nm | 28 | 28 |
| 2nd stage | ∠° | 135 | 135 | |||
| BA62.30-P-1002-02O | Bolt, impact absorber/mounting support to longitudinal member | M12 | Nm | 125 | 125 | |
| BA62.30-P-1003-02O | Bolt, connecting carrier to front axle carrier/radiator support | M8 | Nm | 16 | 16 | |
| BA62.30-P-1004-02O | Bolt, radiator support to mounting support | M8 | Nm | 16 | 16 | |
| BA62.30-P-1005-02O | Bolt, holder for front cross strut to crossmember | M8 | Nm | - | - | |
| BA62.30-P-1006-02O | Bolt, front cross strut to holder | M8 | Nm | - | - | |
| BA62.30-P-1007-02O | Bolt, assembly carrier at top to body | M8 | Nm | 23 | 20 | |
| BA62.30-P-1008-02O | Bolt, assembly carrier at bottom to mounting support | M6 | Nm | 8 | 4 | |
| BA62.30-P-1009-02O | Bolt, holder for air filter housing to longitudinal member | Nm | 20 | |||
| BA62.30-P-1010-02O | Screw, holder to connecting carrier | M6 | Nm | - | 6 | |
| BA62.30-P-1011-02O | Screw, front bumper support to cross strut | Nm | - | 17 | ||
| BA62.30-P-1012-02O | Screw, center strut to suspension strut tower holder | M10 | Nm | |||