Restrict/Restore Remote Functions - AP00.20-P-0065A
MODEL 118, 167, 177, 243, 247
with code 521 (Connect 20 Mid (NTG7))
MODEL 118, 167, 177, 243, 247
with code 525 (Connect 20 High (NTG7))
MODEL 206
MODEL 214
MODEL 223
except code 801 (YoM 20/1)
MODEL 232
MODEL 236
MODEL 254
MODEL 294, 295, 296, 297
Shown on model 206.242
Shown on central display
| Preparatory activity | |||
| 1 | Close hood, doors and trunk lid. | ||
| Restrict remote functions | |||
| Dialing | |||
| 2 | Call up workshop level in the instrument cluster. | Model 118, 167, 177, 243, 247 with code 521 (Connect 20 Mid (NTG7)) Model 118, 167, 177, 243, 247 with code 525 (Connect 20 High (NTG7)) |
AP00.20-P-0046E |
| Model 206 Model 214 Model 223 except code 801 (YoM 20/1) Model 232 Model 236 Model 254 |
AP00.20-P-0046D | ||
| Model 294, 295, 296, 297 "Vehicle data", "ASSYST PLUS", And other equipment-dependent menu items. |
AP00.20-P-0046ES | ||
| 3 | Switch electronic ignition lock control unit to position "2" (circuit 15). | ||
| 4 | Use swipe movements on finger navigation pad (3) to select and confirm "Remote functions" menu item in driver's display (4). | ||
| Check | |||
| 5 | Check whether Mercedes me symbol incl. tracking symbol (1) is activated. | ||
| Restricting | |||
| 6 | Confirm menu item "Restrict remote access to vehicle because of workshop operations?" in driver's display (4) with "OK". | If the message "Remote functions not available or defective, please check Status" appears in the driver's display (4), ↓ the remote functions cannot be restricted. Rectify problem. |
|
| Check | |||
| 7 | Check whether Mercedes me symbol incl. tracking symbol (1) is deactivated. | Only if Mercedes me symbol incl. tracking symbol (1) was activated beforehand. | |
| Deactivation | |||
| 8 | Close workshop level in the instrument cluster. | Model 118, 167, 177, 243, 247 with code 521 (Connect 20 Mid (NTG7)) Model 118, 167, 177, 243, 247 with code 525 (Connect 20 High (NTG7)) |
AP00.20-P-0046E |
| Model 206 Model 214 Model 223 except code 801 (YoM 20/1) Model 232 Model 236 Model 254 |
AP00.20-P-0046D | ||
| Model 294, 295, 296, 297 | AP00.20-P-0046ES | ||
| Restore remote functions | |||
| Dialing | |||
| 9 | Call up workshop level in the instrument cluster. | Model 118, 167, 177, 243, 247 with code 521 (Connect 20 Mid (NTG7)) Model 118, 167, 177, 243, 247 with code 525 (Connect 20 High (NTG7)) |
AP00.20-P-0046E |
| Model 206 Model 214 |
AP00.20-P-0046D | ||
| Model 223 except code 801 (YoM 20/1) Model 232 Model 236 Model 254 |
|||
| Model 294, 295, 296, 297 "Vehicle data", "ASSYST PLUS", And other equipment-dependent menu items. |
AP00.20-P-0046ES | ||
| 10 | Switch electronic ignition lock control unit to position "2" (circuit 15). | ||
| 11 | Use swipe movements on finger navigation pad (3) to select "Remote functions" menu item in driver's display (4) and confirm with OK. | ||
| Restoring | |||
| 12 | In menu item "Restore remote access to vehicle?", confirm with "Yes" in driver's display (4). | Otherwise the remote functions will be restricted again. If the message "Remote functions not available or defective, please check Status" appears in the driver's display (4), ↓ the remote functions cannot be restored. Rectify problem. |
|
| Deactivation | |||
| 13 | Close workshop level in the instrument cluster. | Model 118, 167, 177, 243, 247 with code 521 (Connect 20 Mid (NTG7)) Model 118, 167, 177, 243, 247 with code 525 (Connect 20 High (NTG7)) |
AP00.20-P-0046E |
| Model 206 Model 214 Model 223 except code 801 (YoM 20/1) Model 232 Model 236 Model 254 |
AP00.20-P-0046D | ||
| Model 294, 295, 296, 297 | AP00.20-P-0046ES |