LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> CLA250 Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instruments (1 Of 3) -- 118 Chassis >> Basic Knowledge >> Instrument Cluster Control Unit, Basic Function - GF54.30-P-9891A

Instrument Cluster Control Unit, Basic Function - GF54.30-P-9891A

Model All (4xWD) 

Model All (CAR) 

Overview 

This document contains information on:

General 

The instrument cluster control unit controls all displays in the instrument cluster, either in the head unit/instrument cluster display cluster or in the instrument cluster display.

In off-road vehicles, the display is integrated into the instrument cluster control unit.

When off-road vehicles are in stealth mode, the display is inactive and the warning tones are switched off. The warning lamps and warning tones can be activated as required.

Function 

The instrument cluster control unit is connected to the network architecture of the vehicle.

To display information, the instrument cluster control unit processes information such as the following:

The instrument cluster control unit processes the incoming information and prepares it to be shown on the instrument cluster.

On vehicles with head-up display, the instrument cluster control unit also prepares the information to be shown on the head-up display. The image data is transferred via the high speed video link (HSVL) to the instrument cluster or to the head-up display.

Depending on the equipment installed, the instrument cluster control unit processes the picture data three-dimensionally. For this purpose, the driver's head position is detected by the driver camera in the instrument cluster display.

Depending on this data, the picture signal in the instrument cluster control unit is calculated and sent to the instrument cluster display. If the driver is not detected, e.g. due to concealment, the 3D display position switches smoothly to a 2D display.

  Component descriptions     
  Instrument cluster (IC) control unit component description Model 206 GF54.21-P-6004C
    Model 223 GF54.21-P-6004A
    Model 232 GF54.21-P-6004F
    Model 243 GF54.21-P-6004B
    Model 295 GF54.21-P-6004E
    Model 297 GF54.21-P-6004D
    Model 296 GF54.21-P-6004G
    Model 254 GF54.21-P-6004H