LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> CLA250 Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Central Locking System -- 118 Chassis >> Basic Knowledge >> Trunk Lid/Liftgate Lock, Basic Function - GF80.20-P-2012A

Trunk Lid/Liftgate Lock, Basic Function - GF80.20-P-2012A

Model All (4xWD) 

Model All (CAR) 

Overview 

This document contains information on:

Example illustration of trunk lid/tailgate lock 

G16142937Courtesy of MERCEDES-BENZ USA

General 

The trunk lid/tailgate lock (1) is located at the center on the firewall of the trunk lid or tailgate.

The trunk lid/tailgate lock (1) connects the trunk lid or tailgate with the lock striker, keeps it securely closed or releases it again in the case of an opening request.

Function 

The trunk lid/tailgate lock (1) has the following functions:

Depending on the vehicle, the central signal acquisition and actuation module (SAM control unit) or the rear signal acquisition and actuation module reads in the status of the respective trunk lid/tailgate lock switch. In addition, the central signal acquisition and actuation module or the rear signal acquisition and actuation module actuates the trunk lid/tailgate lock motor accordingly.

Depending on the equipment, the following components that provide assistance with the functions are installed in the trunk lid/tailgate lock (1):

  Component descriptions     
  Trunk lid/liftgate latch component description Model 206 GF80.20-P-6033C
    Model 214 GF80.20-P-6033K
    Model 118
as of model year 2023
Model 177, 247
as of model year 2022
GF80.20-P-6033L
    Model 167
as of model year 2023
GF80.20-P-6033M
    Model 192 GF80.20-P-6033R
  Trunk lid lock, component description Model 223 GF80.20-P-6034A
    Model 232 GF80.20-P-6034F
    Model 254 GF80.20-P-6034H
    Model 214 GF80.20-P-6034K