LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> CLA250 4Matic >> Repair and Diagnosis >> General Information >> OEM General Information >> Overall Vehicle (3 Of 4) -- 118 Chassis >> Maintenance >> Restrict/Restore Remote Functions - AP00.20-P-0065A

Restrict/Restore Remote Functions - AP00.20-P-0065A

MODEL 118, 167, 177, 243, 247 

with code 521 (Connect 20 Mid (NTG7)) 

MODEL 118, 167, 177, 243, 247 

with code 525 (Connect 20 High (NTG7)) 

MODEL 206 

MODEL 214 

MODEL 223 

except code 801 (YoM 20/1) 

MODEL 232 

MODEL 236 

MODEL 254 

MODEL 294, 295, 296, 297 

Shown on model 206.242 

G16140640Courtesy of MERCEDES-BENZ USA

Shown on central display 

G16140641Courtesy of MERCEDES-BENZ USA
  Preparatory activity     
1 Close hood, doors and trunk lid.    
  Restrict remote functions     
  Dialing     
2 Call up workshop level in the instrument cluster. Model 118, 167, 177, 243, 247
with code 521 (Connect 20 Mid (NTG7))
Model 118, 167, 177, 243, 247
with code 525 (Connect 20 High (NTG7))
AP00.20-P-0046E 
    Model 206
Model 214
Model 223
except code 801 (YoM 20/1)
Model 232
Model 236
Model 254
AP00.20-P-0046D
    Model 294, 295, 296, 297
IMPORTANT The workshop level with the tabs appears in the driver's display (4):
"Vehicle data",
"ASSYST PLUS",
And other equipment-dependent menu items.
AP00.20-P-0046ES
3 Switch electronic ignition lock control unit to position "2" (circuit 15). IMPORTANT No fault messages may be shown on the driver's display (4).  
4 Use swipe movements on finger navigation pad (3) to select and confirm "Remote functions" menu item in driver's display (4). IMPORTANT The driver's display (4) shows the option "Restrict remote access to vehicle because of workshop operations?"  
INSPECT Check     
5 Check whether Mercedes me symbol incl. tracking symbol (1) is activated.    
  Restricting     
6 Confirm menu item "Restrict remote access to vehicle because of workshop operations?" in driver's display (4) with "OK". IMPORTANT The driver display (4) shows the "Remote functions restricted, Service Required" message.
If the message "Remote functions not available or defective, please check Status" appears in the driver's display (4),

the remote functions cannot be restricted. Rectify problem.
IMPORTANT After obtaining special order.
 
INSPECT Check     
7 Check whether Mercedes me symbol incl. tracking symbol (1) is deactivated. Only if Mercedes me symbol incl. tracking symbol (1) was activated beforehand.  
  Deactivation     
8 Close workshop level in the instrument cluster. Model 118, 167, 177, 243, 247
with code 521 (Connect 20 Mid (NTG7))
Model 118, 167, 177, 243, 247
with code 525 (Connect 20 High (NTG7))
AP00.20-P-0046E 
    Model 206
Model 214
Model 223
except code 801 (YoM 20/1)
Model 232
Model 236
Model 254
AP00.20-P-0046D
    Model 294, 295, 296, 297 AP00.20-P-0046ES
  Restore remote functions     
  Dialing     
9 Call up workshop level in the instrument cluster. Model 118, 167, 177, 243, 247
with code 521 (Connect 20 Mid (NTG7))
Model 118, 167, 177, 243, 247
with code 525 (Connect 20 High (NTG7))
AP00.20-P-0046E 
    Model 206
Model 214
AP00.20-P-0046D
    Model 223
except code 801 (YoM 20/1)
Model 232
Model 236
Model 254
 
    Model 294, 295, 296, 297
IMPORTANT The workshop level with the tabs appears in the driver's display (4):
"Vehicle data",
"ASSYST PLUS",
And other equipment-dependent menu items.
AP00.20-P-0046ES
10 Switch electronic ignition lock control unit to position "2" (circuit 15). IMPORTANT No fault messages may be shown on the driver's display (4).  
11 Use swipe movements on finger navigation pad (3) to select "Remote functions" menu item in driver's display (4) and confirm with OK.    
  Restoring     
12 In menu item "Restore remote access to vehicle?", confirm with "Yes" in driver's display (4). NOTES If "Restrict remote access to vehicle because of workshop operations?" appears in the driver display (4), do not confirm with "OK".
Otherwise the remote functions will be restricted again.
If the message "Remote functions not available or defective, please check Status" appears in the driver's display (4),

the remote functions cannot be restored. Rectify problem.
IMPORTANT After obtaining special order.
 
  Deactivation     
13 Close workshop level in the instrument cluster. Model 118, 167, 177, 243, 247
with code 521 (Connect 20 Mid (NTG7))
Model 118, 167, 177, 243, 247
with code 525 (Connect 20 High (NTG7))
AP00.20-P-0046E 
    Model 206
Model 214
Model 223
except code 801 (YoM 20/1)
Model 232
Model 236
Model 254
AP00.20-P-0046D
    Model 294, 295, 296, 297 AP00.20-P-0046ES