Retrofit Luggage Net With Holder - AZ68.50-P-0007-02MFA

Model 118, 177, 247 

Fig 1: Identifying Graduated Drill (450 589 00 28 00)

Courtesy of MERCEDES-BENZ USA

1. Place drilling template for luggage net brackets (S) in position against front floor covering (2) at front passenger side.

   

   Contour of drilling template for luggage net brackets (S) must match with contour of center console (3) (arrows C).

   

   Model 118.### 2#, 177.### 2#, 247.### 2#

   In the case of a right-hand drive vehicle, the drilling template for the luggage net brackets (S) must be positioned mirror-inverted.

2. Transfer markings for bores (B) to front floor covering (2) using a suitable pen.

   Courtesy of MERCEDES-BENZ USA

3. Drill applied markings up to first step of stepped drill bit (6) .

   Carefully drill bores for luggage net brackets (1).

   Body can be damaged.

   

   First step corresponds to Ø 6 mm.

   Max. drilling depth 10 mm.

   Courtesy of MERCEDES-BENZ USA

4. Screw brackets (4) into incorporated bores.

   Courtesy of MERCEDES-BENZ USA

5. Align brackets (4).

   

   Opening at brackets (4) must point outwards.

6. Attach luggage net (1) to brackets (4).

   

   Check strap of luggage net (1) must be located behind lugs (8) of brackets (4).

   Courtesy of MERCEDES-BENZ USA