Remove/Install Armrest - AR91.12-P-1744MFA
Model 118, 177, 247
with code 400 (Rear armrest)
Model 243
Shown on model 243
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Unlock center seat backrest (1) and fold forwards. | ||
| 2 | Remove screw (3) of trim strips (4) on left and right sides of armrest (2). | ||
| 3 | Unclip trim strips (4) on left and right sides of armrest (2) and remove. | Otherwise the trim strips (4) could be damaged. |
Fig 1 |
| 4 | Lift center trim (5) at top and remove. | ||
| 5 | Unscrew screws (6). | *BA91.12-P-1010-03N | |
| 6 | Fold up armrest (2) and remove. | ||
| 7 | Install in the reverse order. |
REAR SEATS
| Number | Designation | Model 118 | Model 177 | ||
|---|---|---|---|---|---|
| BA91.12-P-1010-03N | Bolt, armrest to backrest frame | M6 | Nm | - | - |
REAR SEATS
| Number | Designation | Model 243 | Model 247 | ||
|---|---|---|---|---|---|
| BA91.12-P-1010-03N | Bolt, armrest to backrest frame | M6 | Nm | 8 | - |