Remove/Install Side Camera - AR54.65-P-0015MFA
Model 118, 177, 243, 247.0
with code 501 (360° camera)
Shown on model 177.0 with code 501 (360° camera) up to model year 2021
Shown on model 177.0 with code 501 (360° camera) as of model year 2022
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove outside mirror trim. | Model 118, 177, 247.0 with code 501 (360° camera) | AR88.70-P-9040MFA |
| Model 243 with code 501 (360° camera) | AR88.70-P-9040EQA | ||
| 2.1 | Remove additional turn signal lamp. | Model 118, 177 with code 501 (360° camera) |
|
| 2.2 | Remove driver's side telephone antenna or front passenger side telephone antenna. | Model 243, 247.0 with code 274 (Telephone antenna) with code 501 (360° camera) |
AR82.62-P-0011MFB |
| 3 | Release electrical connector (1) and disconnect. | ||
| 4 | Remove screws (2). | ||
| 5 | Remove left side camera (B84/7) or right side camera (B84/8) with holder. | ||
| 6 | Unclip left side camera (B84/7) or right side camera (B84/8) from holder and remove. | When replacing left side camera (B84/7) or right side camera (B84/8). | |
| 7 | Install in the reverse order. | ||
| Calibrate | |||
| 8 | Calibrate left side camera (B84/7) or right side camera (B84/8) using diagnostic system. | ||
| AD00.00-P-2000-06MFA |