Remove/Install Passenger Airbag Unit - AR91.60-P-0680LW

Model 205 

Model 253 

Model 293 

Shown on model 205 

Fig 1: Passenger Airbag Unit Component Location - Model 205

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Remove instrument panel (1).	Model 293	AR68.10-P-1000EQ
		Model 205 Model 253	AR68.10-P-1000LW
2	Unscrew nuts (2).	Nut, front passenger airbag unit to instrument panel	*BA91.60-P-1001-01O
3	Remove front passenger airbag (3).
4	Install in the reverse order.
5	Check Supplemental Restraint System (SRS) using vehicle diagnosis system.
		Model 293	AD00.00-P-2000-06FR
		Model 205 Model 253	AD00.00-P-2000-04B

AIRBAG

Number	Designation		Model 205.0/1/2/3	Model 205.4
BA91.60-P-1001-01O	Nut, front passenger airbag unit to instrument panel	Nm	5	5

AIRBAG

Number	Designation		Model 253	Model 293
BA91.60-P-1001-01OJ	Nut, front passenger airbag unit to instrument panel	Nm	5	5