Remove/Install Left Rear Seat Belt Buckle - AR91.40-P-1526LWR

Model 205 

Model 213 

Model 253, 293 

Shown on model 205.0 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove seat cushion in rear passenger compartment.	Model 205 except code 248 (Rear seat with integrated child seat) except code P10 (Taxi package Germany) Model 213 except code 248 (Rear seat with integrated child seat) Model 253, 293	AR91.12-P-1020LW
		Model 205 with code 248 (Rear seat with integrated child seat) Model 205 with code P10 (Taxi package Germany) Model 213 with code 248 (Rear seat with integrated child seat)	AR91.12-P-1020LWA
2	Disconnect electrical connector (1).
3	Remove screw/bolt (2).	Bolt, rear seat belt buckle	*BA91.40-P-1009-01U
4	Remove seat belt buckle (3).	Note correct installation position of belt end fitting (4) and belt buckle (3).
5	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.0	Model 205.1
BA91.40-P-1009-01U	Bolt, rear seat belt buckle	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.2	Model 205.3
BA91.40-P-1009-01U	Bolt, rear seat belt buckle	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.4	Model 213
BA91.40-P-1009-01U	Bolt, rear seat belt buckle	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 253	Model 293
BA91.40-P-1009-01U	Bolt, rear seat belt buckle	Nm	35	30