Oil Pan Bottom Section Tightening Procedure - AR01.45-P-7500-08MNL
Engine 176, 177
MODIFICATION NOTES
| 28.06.2018 | Screw, oil pan bottom section to oil pan center section/oil pan top section | BA01.45-P-1006-01Y |
OIL PAN
| Number | Designation | Engine 176 in model 217, 222, 223 | Engine 176 in model 167, 463 | |
|---|---|---|---|---|
| BA01.45-P-1006-01Y | Screw, oil pan bottom section to oil pan center section/oil pan top section | Nm | 12 | 12 |
OIL PAN
| Number | Designation | Engine 177 in model 167, 463 | Engine 177 in model 093, 192, 205, 213, 214, 217, 222, 223, 231, 232, 253, 290 | |
|---|---|---|---|---|
| BA01.45-P-1006-01Y | Screw, oil pan bottom section to oil pan center section/oil pan top section | Nm | 12 | 12 |
- Engine 176 in model 217, 222
except code M005 (Vehicles with 4MATIC/all-wheel drive)
Engine 176 in model 463
up to model year 2018
Engine 177 in model 217, 222
except code M005 (Vehicles with 4MATIC/all-wheel drive)
Tighten screws (1 to 21) in numerical sequence
.
Shown on engine 176 in model 222 without code M005 (4MATIC)
- Engine 176 in model 217, 222 with code M005 (Vehicles with 4MATIC/all-wheel drive) Engine 177 in model 213, 217, 222, 253, 290
with code M005 (Vehicles with 4 MATIC/all-wheel drive)
Tighten screws (1 to 14) in numerical sequence
Shown on 177 engine with code M005 (4MATIC)
- Engine 176, 177 in model 463 as of model year 2019 Tighten screws (1 to 13) in numerical sequence
Shown on engine 177 in model 463
- Engine 177 in model 205
Tighten screws (1 to 15) in numerical sequence
Shown on engine 177 in model 205
- Tighten screws (1 to 17) in numerical sequence Engine 176 in model 223
Shown on engine 176 in model 223