Remove/Install Charge Air Distributor - AR09.41-P-8683MNA
Engine 177 in model 205
Modification notes
| 11.9.15 | Bolt, charge air distributor to cylinder head | BA09.41-P-1004-01X |
Shown on left charge air distributor
| Remove/install | |||
| 1 | Remove engine with transmission | AR01.10-P-2401MNA | |
| 2 | Disconnect electrical connection (2) | ||
| 3 | Detach purge line (3) and place to one side | ||
| 4 | Detach vacuum line on charge air distributor (1) | For removal the right charge air distributor (1) | |
| 5 | Disconnect electrical connection (4) | ||
| 6 | Unclip electrical line (5) on charge air distributor (1) | For removal the left charge air distributor (1) | |
| 7 | Open clamp (6) | ||
| 8 | Remove screw/bolts (7) | Tightening procedure for charge air distributor |
AR09.41-P-8683-01MNA |
| *BA09.41-P-1004-01X | |||
| 9 | Remove charge air distributor (1) | ||
| 10 | Install in the reverse order | ||
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 11 | Carry out an engine test run, checking the engine for proper operation and leaktightness |
CHARGE AIR LINE/CHARGE AIR COOLING
| Number | Designation | Engine 177 | |
|---|---|---|---|
| BA09.41-P-1004-01X | Bolt, charge air distributor to cylinder head | Nm | 13 |