LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> C63 AMG 2D Convertible >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System -- Body -- 205 Chassis (5 Of 8) >> Forms >> Updating Of Memory Card For Navigation System Form - OF82.85-P-3001-01A

Updating Of Memory Card For Navigation System Form - OF82.85-P-3001-01A

Model all (CAR) 

with code 357 (Map navigation) 

with code 522 (Audio 20 radio) 

CHECK MAP DATA VERSION

Activity Further Information  
Read out map data version on back side of the original packaging. Example of a version specification: Version X.X (Map 8.0)
Open ODUS on a personal computer system and determine current map data version by looking in version overview. Example of a version specification: Map Version 8.0 
Pathname: ODUS → Marketing and Communications → Navigation → Garmin® MAP PILOT Navigation
The use of a XENTRY Tab is recommended. An ODUS user account is necessary for use.
Compare determined versions. Version on the original packaging matches the current version in ODUS: 
Place SD card in original packaging in the vehicle.
Version on the original packaging is lower than the current version in ODUS: 
Update SD card map data.
UPDATE MAP DATA

Activity  Further Information   
Take SD card out of original packaging.  
Insert SD card into SD card slot in the navigation system.  
Carry out SD card in-service date. The head unit's navigation function must be activated.
It is not possible to carry out SD card in-service date in radio mode, for example.
SD card is authorized for the navigation system and can then only be used in this navigation system.
Take SD card out of SD card slot in the navigation system.  
Insert SD card into SD card slot in personal computer.  
Start Garmin® MAP PILOT Download Manager on personal computer. The Garmin® MAP PILOT Download Manager can be installed via the following path:
ODUS → Marketing and Communications → Navigation → Garmin®
MAP PILOT Navigation
Login data:
User name: DLM
Password: DLM
SD card data is read out, download and installation preparation.
Start download and installation of current map data. Duration of download and installation is approx. 2 to 4 h. No additional system entries are necessary during this period.
Take SD card out of SD card slot in personal computer. Only take SD card out after installation has been completed.
Otherwise, the SD card is not up-to-date.
Place SD card in original packaging in the vehicle.