Replace Rubber Window Spacers - AR67.10-P-1000-02T

Model 190, 205, 207, 211.0/2/6, 212, 217, 218, 222, 253, 292, 293 

1. Glue rubber window spacers (A) according to old positions.

   Remove protective foil from rubber window spacers (A) only on one side.

   Remove protective film of sealing lip at windshield.

   Shown on model 211 

   Fig 1: Rubber Window Spacers Component Location - Model 205 (Shown On Model 211)

   Courtesy of MERCEDES-BENZ USA
2. Model 190 with code M032 (Black Series version)

   Halve upper center rubber window spacer (A) and glue on based on old position.

   Shown on model 190 with code M032 (Black Series version) 

   Fig 2: Rubber Window Spacers Component Location - Model 205 (Shown On Model 190 With Code M032)

   Courtesy of MERCEDES-BENZ USA