Remove/Install Door Sill Molding - AR68.30-P-4100CLW

Model 205.3/4 

Model 238 

Shown on model 205 

Fig 1: Door Sill Molding Component Location - Model 205.3/4

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unclip retaining clip (1.1) on door sill (1) below B-pillar	Clip remover	Fig 2
2	Detach door sill (1) from retaining clips (2) starting at B-pillar
3	Loosen door sill (1) from guide on A-pillar and remove
4	Install in the reverse order

Fig 2: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA