Replace AIRSCARF Control Unit - AR91.30-P-2005LWR
Model 205.4
with code 403 (Heating in head area)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
| 2 | Remove seat cushion in rear | Model 205.4 with code 403 (Heating in head area) except code 248 (Rear seat with integrated child seat) except code P10 (Taxi package Germany) |
AR91.12-P-1020LW |
| 3 | Place damping mat to one side | ||
| 4 | Press catch hooks (arrows A) together, lift up AIRSCARF control unit (N25/7) slightly and extend downwards (arrow B) | ||
| 5 | Disconnect electrical connections (1) from AIRSCARF control unit (N25/7) | ||
| 6 | Install in the reverse order |