Retrofit Digital Radio (DAB) - AN82.60-P-0050LWR

Model 205.4 

with code 506 (Audio 20 NTG 5.5 radio) 

with code 79B (Pre-installation for DAB digital radio standard) 

Model 205.4 

with code 531 (COMAND APS) 

with code 79B (Pre-installation for DAB digital radio standard) 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove
1	Remove FM 1, AM, CL and KEYLESS-GO antenna amplifier (A2/18).
		The FM 1, AM, CL and KEYLESS-GO antenna amplifier (A2/18) is no longer required.	AR82.62-P-8307LWR
2	Remove FM 2, DAB and TV 1 antenna amplifier (A2/131).	Model 205.4 except code 865 (Digital TV tuner)
		The FM 2, DAB and TV 1 antenna amplifier (A2/131) is no longer required.	AR82.62-P-8311LWR
	Install
3	Install a new FM 1, AM, CL and KEYLESS-GO antenna amplifier (A2/18).
			AR82.62-P-8307LWR
4	Install a new FM 2, DAB and TV 1 antenna amplifier (A2/131).	Model 205.4 except code 865 (Digital TV tuner)
			AR82.62-P-8311LWR
	Update Vehicle Documentation (VeDoc)
5	Enter special equipment into online vehicle data card.	Code 537 (Digital radio standard DAB (Digital Audio Broadcasting))
6	Attach "Digital radio retrofitted as per AN82.60-P-0050LWR" note under field organization texts to DG 82.
7	Connect diagnostic system and select vehicle using vehicle identification number (VIN).
			AD00.00-P-2000-04B
8	Perform variant coding using the software calibration number (SCN).	Head unit (A26/17)
9	Disconnect diagnostic system.
			AD00.00-P-2000-04B
	Check
10	Perform function check of digital radio reception.	See Owner's Manual.