Align Windshield In Body Opening - AR67.10-P-1000-04G

Model 117, 156, 169, 170, 171, 172.4, 176, 205, 207, 209, 218, 230.4, 231, 242, 245.2, 246, 253 

Model 212 except code Z04 (Light armoring) 

Fig 1: Identifying Feeler Gauge (129 589 03 2100)

Courtesy of MERCEDES-BENZ USA

Model 212, 218 

Courtesy of MERCEDES-BENZ USA

Model 207, 209, 231 

Courtesy of MERCEDES-BENZ USA

Model 117, 156, 169, 170, 171, 172, 176, 205, 230, 242, 245, 246, 253 

Courtesy of MERCEDES-BENZ USA

1. Place windshield (1) down on windshield rubber spacers on body flange.
2. Center windshield (1) in body opening.
3. Adjust gap dimension (A) with feeler gauge.
4. Glue on strips of adhesive tape (arrows).
5. Cut through adhesive strips (arrows) at top of windshield (1).
6. Remove windshield (1) from vehicle.

   Shown on model 169.0 

Courtesy of MERCEDES-BENZ USA