Remove/Install Wheel And Tire Assemblies - AR40.10-P-1102A

Model 205, 206, 213, 217, 222, 223, 238, 253, 257, 290, 293, 297

MODIFICATION NOTES

08.04.2021

Installing differently coated wheel bolts on one wheel and tire assembly (1) is not permissible.

Operation step 4.

Fig 1: Wheel And Tire Assemblies Components Location - Model 205

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Information on tires/rims		AH40.10-P-9411-01A
	Notes on handling, transport and storage of ceramic brake disks		AH42.10-P-9406-13A
	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove
1	Raise vehicle.		AR00.60-P-1006A
2.1	Remove wheel trim.	If installed.
2.2	Remove screw-on AMG hub covers in center lock design.	If installed. Socket wrench bit	Fig 3
3	Remove wheel and tire assemblies (1).	Model 205, 206, 213, 217, 222, 223, 253, 290, 293, 297 with code B07 (AMG - ceramic brake system) For vehicles with ceramic brake disk (4), always use a wheel lift dolly (3). Otherwise, ceramic brake disk (4) will be damaged. Only for Use a wheel lift dolly (3) with a rim size from 17". Commercially available devices/tools Wheel lift Socket wrench	Fig 2
	Check
4	Check the wheel bolt connection components.	Installing differently coated wheel bolts on one wheel and tire assembly (1) is not permissible. Otherwise braking vibrations will occur. Before mounting a wheel and tire assembly (1), remove minor soiling using a rag. Apply heat-resistant lubricating paste sufficiently on wheel hub. Paste, hot lubrication 1 kg, DBL 6879.20 If problems exist, ↓ Clean wheel bolt connection components and protect against corrosion.	*BR00.45-Z-1005-06A
			AR40.10-P-1100-02A
5	Check tires of wheel and tire assemblies (1) for wear and damage.	Model 297	AP40.10-P-4055ES
		Model 206, 223	AP40.10-P-4051A
		Model 205, 213, 217, 222, 238, 253, 257, 290, 293	AP40.10-P-4051EW
6	Check manufacturing date of tires on front and rear axle.	Model 222, 223 with code Z07 (B7 armoring on special protection version)	AR40.10-P-0002-01LF
	Install
7	Mount wheel and tire assemblies (1).	Model 205, 206, 213, 217, 222, 223, 253, 290, 293, 297 with code B07 (AMG - ceramic brake system) For vehicles with ceramic brake disk (4), always use a wheel lift dolly (3). Otherwise, ceramic brake disk (4) will be damaged. Only for Use a wheel lift dolly (3) with a rim size from 17". Commercially available devices/tools Wheel lift Commercially available devices/tools Torsion bar Use torsion bar (5) for 2nd stage (initial torque). Observe tightening sequence (A, B, C, D, E) and the multistage tightening torque of the wheel bolts. Model 205, 206, 217, 253, 293, 297	*BA40.10-P-1001-01P
		Model 222 except code Z07 (B7 armoring on special protection version) Model 222 with code Z07 (B7 armoring on special protection version) Model 223 except code Z07 (B7 armoring on special protection version) Model 223 with code Z07 (B7 armoring on special protection version) Model 213 Wheel bolt to light alloy wheel	*BA40.10-P-1002-01F
		Model 213 Wheel bolt to steel wheel	*BA40.10-P-1001-01F
		Model 238 Wheel bolt to light alloy wheel	*BA40.10-P-1001-01N
		Model 257, 290 Wheel bolt	*BA40.10-P-1001-01O
		Socket wrench	Fig 2
8.1	Mount wheel trim.	If installed. Check for firm seating of wheel trim on rim and for correct positioning of wheel trim relative to valve. Otherwise, the wheel trim will be lost or the valve will be damaged.
8.2	Mount screw-on AMG hub covers in center lock design.	If installed. Model 205, 217, 253, 297 Aluminum wheel hub cover to light alloy wheel Model 222 except code Z07 (B7 armoring on special protection version) Model 222 with code Z07 (B7 armoring on special protection version) Model 223 except code Z07 (B7 armoring on special protection version) Model 223 with code Z07 (B7 armoring on special protection version)	*BA40.10-P-1002-01P
		Model 213 Aluminum wheel hub cover to light alloy wheel	*BA40.10-P-1003-01F
		Model 257 Model 290 Aluminum wheel hub cover to light alloy wheel	*BA40.10-P-1002-01O
		Socket wrench bit	Fig 3
9	Check tire pressure on wheel and tire assemblies (1).	Model 297	AP40.15-P-4061ES
		Model 206, 223	AP40.15-P-4061D
		Model 205, 213, 217, 222, 238, 253, 257, 290, 293 If there is a problem, ↓ Correct tire pressure on wheel and tire assemblies (1).	AP40.15-P-4061A
10	Lower vehicle.		AR00.60-P-1006A
11	Check maximum speed limitation in instrument cluster, correct if necessary. Limited maximum speed for winter tires with speed index V	Note tire speed rating. If the maximum permissible speed of an M+S tire is lower than the maximum permissible speed of the vehicle. ↓ Apply corresponding adhesive label in the driver's visual field.	AH40.10-P-1020-03A

WHEELS

Number	Designation			Model 213
BA40.10-P-1001-01F	Wheel bolt to steel wheel	Stage 1 (position by hand)	Nm	-
		Stage 2 (initial torque)	Nm	75
		Stage 3	Nm	130

WHEELS

Number	Designation			Model 238
BA40.10-P-1001-01N	Wheel bolt to light alloy wheel	Stage 1 (position by hand)	Nm	-
		Stage 2 (initial torque)	Nm	75
		Stage 3	Nm	150

WHEELS

Number	Designation			Model 257	Model 290
BA40.10-P-1001-01O	Wheel bolt	Stage 1 (position by hand)	Nm	-	-
		Stage 2 (initial torque)	Nm	75	75
		Stage 3	Nm	150	150

WHEELS

Number	Designation			Model 206	Model 205
BA40.10-P-1001-01P	Wheel bolt	Stage 1 (position by hand)	Nm	-	-
		Stage 2 (initial torque)	Nm	75	75
		Stage 3	Nm	150	130

WHEELS

Number	Designation			Model 217	Model 222 except code Z07 (B7 armoring on special protection version)
BA40.10-P-1001-01P	Wheel bolt	Stage 1 (position by hand)	Nm	-	-
		Stage 2 (initial torque)	Nm	75	75
		Stage 3	Nm	150	150

WHEELS

Number	Designation			Model 222 with code Z07 (B7 armoring on special protection version)	Model 223 except code Z07
BA40.10-P-1001-01P	Wheel bolt	Stage 1 (position by hand)	Nm	-	-
		Stage 2 (initial torque)	Nm	75	75
		Stage 3	Nm	180	150

WHEELS

Number	Designation			Model 223 with code Z07	Model 253
BA40.10-P-1001-01P	Wheel bolt	Stage 1 (position by hand)	Nm	-	-
		Stage 2 (initial torque)	Nm	75	75
		Stage 3	Nm	180	150

WHEELS

Number	Designation			Model 293	Model 297
BA40.10-P-1001-01P	Wheel bolt	Stage 1 (position by hand)	Nm	-	-
		Stage 2 (initial torque)	Nm	75	75
		Stage 3	Nm	150	150

WHEELS

Number	Designation			Model 213
BA40.10-P-1002-01F	Wheel bolt to light alloy wheel	Stage 1 (position by hand)	Nm	-
		Stage 2 (initial torque)	Nm	75
		Stage 3	Nm	150

WHEELS

Number	Designation		Model 257	Model 290
BA40.10-P-1002-01O	Aluminum wheel hub cover to light alloy wheel	Nm	27	27

WHEELS

Number	Designation		Model 205	Model 217
BA40.10-P-1002-01P	Aluminum wheel hub cover to light alloy wheel	Nm	27	27

WHEELS

Number	Designation		Model 222 except code Z07 (B7 armoring on special protection version)	Model 222 with code Z07 (B7 armoring on special protection version)
BA40.10-P-1002-01P	Aluminum wheel hub cover to light alloy wheel	Nm	27	27

WHEELS

Number	Designation		Model 223 except code Z07	Model 223 with code Z07
BA40.10-P-1002-01P	Aluminum wheel hub cover to light alloy wheel	Nm	27	-

WHEELS

Number	Designation		Model 253	Model 297
BA40.10-P-1002-01P	Aluminum wheel hub cover to light alloy wheel	Nm	27	-

WHEELS

Number	Designation		Model 213
BA40.10-P-1003-01F	Aluminum wheel hub cover to light alloy wheel	Nm	27

Fig 2: Identifying Socket Wrench (199 589 01 09 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Socket Wrench Bit (222 589 00 09 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51