1205 588 00 23 00 Data Sheet - WS60.00-P-0076K

Model 205.0 

Use in FG 60/61/62/63/64/Set K 

Purpose: 

Straightening and portal bracket for measuring and repairing vehicle bodies.

Test equipment category CAT_A.

Reference information: 

Recommended workshop equipment and information about the manufacturers can be found in the WS information (see below).

Courtesy of MERCEDES-BENZ USA

Note: 

Please observe manufacturer's set-up plan.

Manufacturer 1 

CELETTE FRANCE SAS

3, avenue Marcelin Berthelot

38200 Vienne

France

http://www.celette.com 

• Straightening tool parts list for set-up plan 7205.5B 

  1 x 7205.5001

  1 x 7205.5002

  1 x 7205.5003

  1 x 7205.5004

  1 x 7205.5005

  2 x 7205.5006

  1 x 7205.5007

  1 x 7205.5008

  1 x 7205.5009

  1 x 7205.5010

  2 x 7205.5011

  2 x 7205.5012

  1 x 7205.5013

  1 x 7205.5014

  1 x 7205.5015

  1 x 7205.5016

  1 x 7205.5017

  1 x 7205.5018

  1 x 7205.5019

  1 x 7205.5020

  1 x 7205.5021

  1 x 7205.5022

  1 x 7205.5023

  2 x 7205.5024

  2 x 7205.5025

  1 x 7205.5026

  1 x 7205.5027

  1 x 7205.5028

  1 x 7205.5029

  2 x 7205.5031

  1 x 7205.5032

  1 x 7205.5033

  2 x 7205.5034

  1 x 7205.5035

  1 x 7205.5036

  2 x 7205.5037

  2 x 7205.5051

  2 x 7205.5055

  2 x 7205.5073

  2 x 7205.5074

  2 x B.09.300

  2 x BXY1

  1 x EN.057.0

• Portal bracket parts list for set-up plan 7205.8A 

  1 x 7205.5501

  1 x 7205.5502

  1 x 7205.5503

  1 x 7205.5504

  1 x 7205.5505

  1 x 7205.5506

  1 x 7205.5507

  1 x 7205.5508

  8 x CP.01

  6 x CP.02

  4 x VP.012