Wiring Diagram For Gasoline Direct Injection System Control Unit - PE07.08-P-2101FBC
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2023 Mercedes-Benz GLC43 AMG, 2022 Mercedes-Benz GLC43 AMG, 2021 Mercedes-Benz GLC63 S AMG, 2021 Mercedes-Benz GLC63 AMG, and 2021 Mercedes-Benz GLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 177 in model 205 up to model year 2019 Control unit N3/10, on vehicle side
Engine 177 in model 253 up to model year 2020 Control unit N3/10, on vehicle side
| Wiring diagram for gasoline-DI control unit | PE07.08-P-2101-97FBC | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28FBA | ||
| Use of wiring diagrams | OV00.01-P-1901-03FBA | ||
| Search aid for all electrical components | OV00.01-P-1909FBA | ||
| Location and assignment of line and plug connectors | GF00.19-P-1000FBA | ||
| Location and assignment of ground points | GF00.19-P-2000FBA | ||
| Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | GF00.19-P-3000FBA | ||
| Fuse and relay box, as-built configuration | GF54.15-P-0800RF |