Remove/Install Fender Liner In Rear Fender - AR88.10-P-1400LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

Model 253

Model 293

Shown on fender liner (1), model 205

Fig 1: Fender Liner In Rear Fender Components Location - Model 253 (Shown On Model 205)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Raise vehicle.	Model 205 Model 253 Model 293 Model 205 Model 253	AR00.60-P-1002LWG
2	Remove expansion rivets (2).
3	Unscrew nuts (3).
4	Pull outer edge of the fender liner (1) inward out of the wheel arch lip and remove fender liner (1).
5	Install in the reverse order