000 588 14 80 00 Above-Floor Alignment Lift, 4.0 T - WS00.00-P-0072B

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model all (4xWD, CAR, smart)

Use in FG 00/Set B

Purpose:

Surface-mounted alignment lift with two parallel tracks including integrated sliding plates and recesses for turntables.

Test equipment category CAT_A.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found below.

MODIFICATION NOTES

23.05.2017

All references to accessory parts removed.

Courtesy of MERCEDES-BENZ USA

NOTE: Please note the vehicle-specific accessories. Limited use possible for Vitoria vans.

Manufacturer 1:

MAHA Maschinenbau Haldenwang GmbH & Co. KG

Hoyen 20

87490 Haldenwang

Germany

http://www.maha.de

Type/model: CARLIFT II 4.0 MB

Article no.: VP 251188

Manufacturer 2

Ravaglioli SPA

Sasso Marconi fraz. Pontecchio

40037 Bologna

Italy

http://www.ravaglioli.com

Type/model: Ravaglioli SPA - RAV4406MB
Article no.: RAV4406MB
Type/model: RAVAGLIOLI SPA - RAV8045.2.48MB
Article number: RAV8045.2.48MB
Type/model: Butler SPA - Logic406MB
Article no.: Logic406MB
Type/model: Butler SPA - CISORY45.48AMB
Article number: CISORY45.48AMB
Type/model: Space Srl - SQ406MB
Article no.: SQ406MB
Type/model: Space Srl - SF8045.2.48MB
Article number: SF8045.2.48MB
Type/model: BlitzRotary GmbH - V45AK48MB

Article no.: V45AK48MB