Detach/Attach Belt End Fitting - AR91.40-P-1030-02A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 172, 190, 231
MODEL 205.0/1/2, 213, 253, 293 except code 460 (Canada version) except code 494 (US version)
MODEL 206 except code 460 (Canada version) except code 494 (US version) except code 51B (Rating, country group EURO-NCAP)
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
Remove
- Pull belt end fitting (1) upward (arrow A).
- Release belt end fitting (1) by minimally (approx. 2 mm) lifting spring (2) (arrow B1), press down (arrow B2) and remove.
Install
- Position belt end fitting (1) on screw/bolt (3) (arrow D) and pull upward (arrow A).
- Press belt end fitting (1) down (arrow B2).
The spring (2) must make contact at bolt head of screw/bolt (3). Dimension "E" must be at least 1.7 mm.
- Have engagement checked by 2nd person.