000 588 14 80 00 Above-Floor Alignment Lift, 4.0 T - WS00.00-P-0072B

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL All (4xWD, CAR, smart)

MODIFICATION NOTES

23.05.2017

All references to accessory parts removed.

Use in FG 00/Set B

Purpose:

Surface-mounted alignment lift with two parallel tracks including integrated sliding plates and recesses for turntables.

Test equipment category CAT_A.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Please note the vehicle-specific accessories. Limited use possible for Vitoria vans.

Manufacturer 1:

MAHA Maschinenbau Haldenwang GmbH & Co. KG

Hoyen 20

87490 Haldenwang

Germany

http://www.maha.de

Type/model: CARLIFT II 4.0 MB
Article no.: VP 251188

Manufacturer 2

Ravaglioli SPA

Sasso Marconi fraz. Pontecchio

40037 Bologna

Italy

http://www.ravaglioli.com

Type/model: Ravaglioli SPA - RAV4406MB
Article no.: RAV4406MB
Type/model: RAVAGLIOLI SPA - RAV8045.2.48MB
Article number: RAV8045.2.48MB
Type/model: Butler SPA - Logic406MB
Article no.: Logic406MB
Type/model: Butler SPA - CISORY45.48AMB
Article number: CISORY45.48AMB
Type/model: Space Srl - SQ406MB
Article no.: SQ406MB
Type/model: Space Srl - SF8045.2.48MB
Article number: SF8045.2.48MB
Type/model: BlitzRotary GmbH - V45AK48MB
Article no.: V45AK48MB