Perform Adjustments To The Control System - AR54.30-P-1000-02RAU

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 166, 172, 207, 212, 218, 231

with code 475 (Tire pressure monitoring system)

Model 205, 253

with code 475 (Tire pressure monitoring system)

Correct air pressure for all tires.
Switch on ignition.
Keep pressing the system select button (S110s3) until the "Service" menu is highlighted with a bar in the multifunction display (A1p13).
Restart tire pressure monitor, shown on model 212.002

Courtesy of MERCEDES-BENZ USA
Select "Tire pressure" with the scroll forward/back button (S110s1).
OK button (S110s6) press.
In the multifunction display (A1p13), the current tire pressures or the note "Tire pressure display appears after driving for a few minutes" are displayed.
Press scroll forward/back button (S110s1).
The note "Adopt current pressures as new guideline values" is shown in the multifunction display (A1p13).
OK button (S110s6) press.
The note "Tire pressure monitoring restarted" is shown in the multifunction display (A1p13). After a few minutes' driving the tire pressures are displayed and monitored.
Switch off ignition.