LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> C300 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Electrical System - Body - 213 Chassis 3 Of 7) >> Testing & Repair >> Remove/Install Wiper Arms >> Remove/Install Wiper Arms - AR82.30-P-6100-03LWE

Remove/Install Wiper Arms - AR82.30-P-6100-03LWE

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 205, 206, 213, 253, 293, 297 

Model 238 

except Code 874 (MAGIC VISION CONTROL incl. Heated windshield washer) 

WARNING Risk of injury  by clamping or crushing, in extreme cases by shearing off limbs when interfering with the windshield wiper mechanism When working on the windshield wiper mechanism, always switch off the ignition and keep the transmitter key outside the transmitter range (at least 2 m). AS82.30-Z-0001-01A 
WINDSHIELD WIPERS

Number Designation Model 205 Model 206
BA82.30-P-1001-01M Nut on wiper arm Nm 30 30
WINDSHIELD WIPERS

Number Designation Model 213 Model 253
BA82.30-P-1001-01M Nut on wiper arm Nm 30 30
WINDSHIELD WIPERS

Number Designation Model 293
BA82.30-P-1001-01M Nut on wiper arm Nm 30
WINDSHIELD WIPERS

Number Designation Model 297
BA82.30-P-1001-01S Nut wiper arm to windshield washer M10 Nm 30
Fig 1: Identifying Printing Piece M 10X1, (210 589 04 63 00)
G07304530Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Pullers (001 589 38 33 00)
G13774913Courtesy of MERCEDES-BENZ USA

Disassemble 

  1. Remove cover caps (3, 4).
  2. Remove nuts (5).
  3. Wiper arms (1, 2) with the SPECIAL TOOL Puller and SPECIAL TOOL Loosen and remove the pressure piece from the windshield wiper system.

    Install 

  4. Place the wiper arms (1, 2) on the drivers of the windshield wiper system.

    IMPORTANT Position the wiper arms (1, 2) using the window markings.

  5. Screw on nuts (5) models 205, 206, 213, 253, 293 TORQUE SPECIFICATION Model 297 TORQUE SPECIFICATION .
  6. Install cover caps (3, 4).
    G12824529Courtesy of MERCEDES-BENZ USA