Restart Tire Pressure Monitor (TPM) - AR54.30-P-1001-01EQ

Model 205 

as of model year 2019 

with code 475 (Tyre pressure monitoring system) 

Model 253 

as of model year 2020 

with code 475 (Tyre pressure monitoring system) 

Model 293 

1. Correct tire pressure at wheels on front and rear axle.
2. Switch on ignition.
3. Call up "Accept current tire pressure values as new guideline values" menu in multifunction display.

   Service →

   Tires →

   Use current pressure values as guideline values.

4. Confirm "Accept current tire pressure values as new guideline values?".

   A "Tire pressure monitor restarted" message is shown on the instrument cluster. After a few minutes' driving the tire pressures are displayed and monitored.

5. Switch off ignition.