Cleaning Plastic Cover Plates Of Lamps - AH82.10-P-1002-01A

Model all (4xWD, CAR) 

Model all (Light transporter) 

The headlamp cover plates consist of plastic (polycarbonate) and are coated with a clearcoat finish.

Clean cover plate by wiping off with a wet sponge.

Do not use any scouring agents or a dry cloth, as otherwise the surface will be scratched.

The cover plate must not come into contact with solvents or cleaning agents containing solvents, because the surface is not absolutely resistant to solvents.

Failure to comply with protective measures could lead to surface damage to the headlamp cover plate, such as, e.g. a milky-colored coating, matt areas and stress fractures.