Remove/Install Side View Mirror Glass - AR88.70-P-9020LF
Model 205, 213, 217, 222, 238, 253, 293
Modification notes
MODIFICATION NOTES
| 30.01.2019 | Work procedure completely modified. |
| Risk of injury caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens. | Wear protective gloves and safety glasses. | AS60.00-Z-0008-01R | |
| Remove/Install | |||
| 1 | Tilt out mirror glass (1) at top. | ||
| 2 | Remove mirror glass (1) by hand from housing and in doing so unclip at mirror glass adjustment drive. | During unclipping, ensure that mirror glass (1) is not tensioned too much. Mirror glass (1) will otherwise break and must be replaced. Installation: Clip mirror glass (1) into mirror glass adjustment drive from the bottom up. Ensure that all catch hooks (2) arrest completely. |
|
| 3 | Disconnect electric lines from electrical connections (3, 4) and remove mirror glass (1). | The number of electrical connections (3, 4) depends on the vehicle equipment. Installation: Ensure that electrical wiring harnesses are routed correctly. |
|
| 4 | Install in the reverse order |