Pneumatic Brake Booster Test Specifications - BE43.10-P-1000-01H
Model 177
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 177.### 1# with engine 654 with code 411 with code B01, model 177.### 1# with engine 654 with code M013 except code 950/ U29, model 177.### 2# with engine 260/608, model 177.### 2# with engine 282 except code ME08 | Model 177 with engine 282 with code ME08, model 177.### 1# with engine 139/260, model 177.### 1# with engine 654 with code 950/U29, model 177.### 1# with engine 654 with code B01 except code 411 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01H | Brake booster Ø | Ø | Inch | 10 | 11 | ||
| BE43.10-P-1002-01H | Boost factor | 7 | 7, 5 | ||||
| BE43.10-P-1003-01H | Master brake cylinder Ø | mm | 23, 81 | 25, 4 | |||
| BE43.10-P-1004-01H | Brake line pressure | Vacuum 0.92...0.98 bar | Force on brake pedal (force to input rod for pedal -i = 3.3) | 165 N | bar | 18 | 21 |
| 330 N | bar | 43 | 44 | ||||
| 495 N | bar | 67 | 68 | ||||
| 660 N | bar | 92 | 91 | ||||
| 825 N | bar | 111 | 113 | ||||
| BE43.10-P-1005-01H | Line pressure without vacuum | Force on brake pedal (force to input rod for pedal -i = 3.3) | 165 N | bar | 0 | 0 | |
| 330 N | bar | 1, 3 | 1, 1 | ||||
| 495 N | bar | 4, 5 | 1, 1 | ||||
| 660 N | bar | 7, 7 | 6, 9 | ||||
| 825 N | bar | 11 | 9, 9 | ||||
| 1650 N | bar | 29 | 26 | ||||
| BE43.10-P-1006-01H | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | 0, 75...0, 8 | 0, 75...0, 8 | ||
| Test period | s | 30 | 30 | ||||
| Permissible pressure loss | bar | ≤0, 2 | ≤0, 2 | ||||
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 177.### 1# with engine 282 except code ME08, model 177.### 1# with engine 608 model 177.### 2# with engine 139/654 | ||||
|---|---|---|---|---|---|---|
| BE43.10-P-1001-01H | Brake booster Ø | Ø | Inch | 8+8 | ||
| BE43.10-P-1002-01H | Boost factor | 7, 5 | ||||
| BE43.10-P-1003-01H | Master brake cylinder Ø | mm | 25, 4 | |||
| BE43.10-P-1004-01H | Brake line pressure | Vacuum 0.92.0.98 bar | Force on brake pedal (force to input rod for pedal -i = 3.3) | 165 N | bar | 21 |
| 330 N | bar | 44 | ||||
| 495 N | bar | 68 | ||||
| 660 N | bar | 91 | ||||
| 825 N | bar | 113 | ||||
| BE43.10-P-1005-01H | Line pressure without vacuum | Force on brake pedal (force to input rod for pedal -i = 3.3) | 165 N | bar | 0 | |
| 330 N | bar | 0, 6 | ||||
| 495 N | bar | 3, 4 | ||||
| 660 N | bar | 6, 4 | ||||
| 825 N | bar | 9, 4 | ||||
| 1650 N | bar | 25 | ||||
| BE43.10-P-1006-01H | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | 0, 75...0, 8 | ||
| Test period | s | 30 | ||||
| Permissible pressure loss | bar | ≤ 0, 2 | ||||