Turbocharger - BA09.40-P-1000-02G
Engine 260
TURBOCHARGER
| Number | Designation | Engine | ||
|---|---|---|---|---|
| BA09.40-P-1001-02G | Nut, turbocharger/exhaust manifold to cylinder head | Nm | 15 | |
| BA09.40-P-1002-02G | Bolt, feed line/return line to turbocharger/crankcase | Stage 1 | Nm | 8 |
| Stage 2 | ∠° | 60 | ||
| BA09.40-P-1003-02G | Bolt, coolant return line to oil line | Nm | 5 | |
| BA09.40-P-1004-02G | Nut, turbocharger support brace to turbocharger | Nm | 30 | |
| BA09.40-P-1005-02G | Bolt, turbocharger support brace to crankcase | Stage 1 | Nm | 15 |
| Stage 2 | ∠° | 90 | ||
| BA09.40-P-1006-02G | Nut, holder for heat shield to exhaust gas turbocharger | Nm | 30 | |
| BA09.40-P-1007-02G | Bolt, holder for heat shield on exhaust gas turbocharger to cylinder head | Nm | 20 | |
| BA09.40-P-1008-02G | Bolt, heat shield to cylinder head/holder/support | Nm | 10 | |
| BA09.40-P-1009-02G | Bolt/nut, heat shield to turbocharger | Nm | 8 | |
| BA09.40-P-1010-02G | Stud bolt on turbocharger | Nm | 6 | |
| BA09.40-P-1011-02G | Screw, boost pressure control flap actuator to exhaust gas turbocharger | Nm |