(Function Schematic, Wipe And Wash Rear Window - PE82.30-P-2501-97C)
Model 464
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Combination switch, status | 8D |
| 1 | Combination switch, status | 16E |
| 2 | DIRECT SELECT lever, status | 9D |
| 2 | Vehicle speed, signal | 16D |
| 3 | Vehicle speed, signal | 9G |
| 3 | Vehicle speed, signal | 17D |
| 4 | Circuit 15, status ON | 17D |
| 5 | Washer fluid level switch, signal | 17G |
| 6 | Wiper motor, actuation | 25C |
| 7 | Wipe request, signal | 25F |
| 8 | Instrument cluster, message | 32F |
| 9 | Windshield washer system pump, actuation | 33J |
| A1 | Instrument cluster | 34G |
| CAN B | CAN for vehicle interior | 15E |
| CAN B | CAN for vehicle interior | 23F |
| CAN HMI | CAN for user interface | 31F |
| Flex E | Chassis FlexRay | 7D |
| Flex E | Chassis FlexRay | 7G |
| M5/1 | Windshield washer system pump | 34K |
| M6/4 | Rear-end door wiper motor | 27D |
| N10/8 | Signal acquisition and actuation module control unit | 19F |
| N30/4 | Electronic Stability Program control unit | 3J |
| N73/3 | Electronic ignition switch control unit | 11E |
| N73/3 | Electronic ignition switch control unit | 27G |
| N80 | Steering column module control unit | 2E |
| S42 | Windshield washer system washer fluid level switch | 11H |