(Connect STAR DIAGNOSIS, Read Out Fault Memory - AD00.00-P-2000-04FF)

Model 454.0 

Courtesy of MERCEDES-BENZ USA

1. Remove cover (1) under the instrument panel
2. Connect STAR DIAGNOSIS to data link connector (X11/4).

   Pay attention to the locking of the catch lug.

3. Switch on ignition.
4. Start DAS application.

   Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following the completion of the operations.

5. Disconnect STAR DIAGNOSIS in reverse order.