Remove/Install Side Paneling In Rear - AR68.30-P-4780MFA

Model 177.0 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove C-pillar trim.		AR68.30-P-4491MFA
2	Remove seat backrest in rear.	Model 177.0 with code 287 (Folding seat backrests in rear passenger compartment)	AR91.12-P-1713MFA
3	Release edge guard (2) in working area.	Ensure that edge guard (2) is seated correctly.
4	Carefully release side trim in rear (1) at retaining clips (3) and retaining clamps (4) and remove.	Replace damaged retaining clips (3) and retaining clamps (4).
		Dismantling tool	Fig 1
5	Install in the reverse order.

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA