Remove/Install Additional Brake Lamp - AR82.10-P-5376MFV

Model 118.3, 177.1/9 

Fig 1: Additional Brake Lamp Components Location - Model 177.1

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Release catches (4) using extraction hook.	Extraction hook	Fig 2
2	Remove housing (1) with center brake lamp (E21) far enough to gain access to the electrical connector (3).
3	Release and disconnect electrical connection (3).
4	Remove housing (1) with center brake lamp (E21).
5	Remove screw/bolts (2).	When replacing center brake lamp (E21).
6	Remove center brake lamp (E21).
7	Install in the reverse order.

Fig 2: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA