Risk Of Injury Caused By Scraping Or Cutting Body Parts On Sharp Vehicle Parts - AS00.00-Z-0017-01A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL ALL (4xWD, CAR, Heavy transporter, Light transporter, smart)
Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
Model 601, 602, 606, 611, 690, 900, 901, 902, 904, 905, 906, 907, 909, 910
Model 903 (except 903.662)
Model 903.662 except code Z29 (James Cook touring camper, NAFTA) except code ZU8 (National version for USA)
Risk of injury
There is the risk of injury caused by cutting, ripping or scraping on non-deburred edges when performing work on body panels and components, major assembly parts and suspension parts that have not yet been deburred due to their manufacturing process or machining stage.
Safety instructions/precautions
- Wear protective gloves.
- Deburr repair panels and edges that have been cut.
- Protect sharp-edged components against contact