Risk Of Injury Caused By Fingers Being Jammed Or Pinched When Removing, Installing Or Aligning Hoods, Doors, Trunk Lid/Rear-End Door Or Sliding Roof - AS00.00-Z-0011-01A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model all (4xWD, CAR, Heavy transporter, Light transporter, smart)
No parts of the body or limbs should be within the operating area when the components are moving.
Risk of injury
When working on hoods, doors, trunk lids and sliding roofs and on their mechanisms that connect them to the body, serious injuries can occur as a result of cutting, pinching or crushing of body parts like fingers and hands.
Safety instructions/precautions
- Be careful when working in hazard areas.
- Secure the operating area of the mechanism against interference when parts are in motion.
- Use special tools or other aids to ensure safe distances.
- Wear protective gloves