000 588 16 80 00 Underfloor Swivel Arm Vehicle Lift 3.5-4.0 T - WS00.00-P-0044B

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model all (4xWD, CAR, smart)

MODIFICATION NOTES

22.05.2017

All references to accessory parts removed.

Use in FG 00/Set B

Purpose:

In-ground swivel arm ram-type vehicle lift for lifting vehicles with extendable swivel-arm load supports.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Limited use possible for light-duty vans.

Manufacturer 1:

Autop Maschinenbau GmbH

Sandkampstrasse 90

48432 Rheine

Germany

https://www.autopstenhoj.com

Type/model: Masterlift 2.35 Saav 135
Article no.: H 11 01 01 1A
Type/model: Masterlift 2.35 Saa 260

Article number: H 11 01 16 1A

Manufacturer 2

MAHA Maschinenbau Haldenwang GmbH & Co. KG

Hoyen 20

87490 Haldenwang

Germany

https://www.maha.de

Type/model: ZS Square II 3.5 KS MB

Article numebr: VP 252247

Manufacturer 3:

Ravaglioli SPA

Sasso Marconi fraz. Pontecchio

40037 Bolognia

Italy

https://ravaglioli.com

Type/Model: RAV1110NKMB

Article number: RAV1110NKMB

Manufacturer 4:

BlitzRotary GmbH

Hufinger Strasse 55

78199 Braunlingen

Germany

http://www.BRBunited.com

Type/model: IL2.35NKA-MB

Article number: IL2.35NKA-MB

Manufacturer 5:

Herrmann AG

Bahnhofstrasse 52

93483 Posing

Germany

http://www.herrmann.de

Type/model: Swing arm 2.35

Article no.:109620